AshGrid™/DuoTherm U-Value Tool
Thermal performance calculator
Use Ash & Lacy’s free online U-value calculator to quickly assess the thermal performance of built-up metal roofing and cladding systems using our AshGrid™ components or complete DuoTherm spacer systems. Designed for specifiers, contractors, architects and construction professionals, the tool provides fast, accurate U-value calculations to support design and specification.
Configure an AshGrid™ spacer system by selecting your bracket, rail, insulation and sheeting profile, or choose a complete DuoTherm system incorporating AshGrid™ spacer components, Ash & Lacy profile sheets and non-combustible insulation.
Please note: The insulation thicknesses available within the calculator may not always correspond to commercially available products. Please confirm product availability before placing an order.
We are continually enhancing the calculator and will be adding support for additional system configurations and functionality over time. If you have any feedback or suggestions, we’d love to hear from you at technical@ashandlacy.com.

What is a U-Value?
A U-value is a measure of thermal transmittance, indicating how easily heat passes through a building element such as a wall, window, roof or floor. It quantifies the rate of heat transfer through the construction and is measured in W/m²K.
A lower U-value indicates better thermal insulation, helping to improve energy efficiency, reduce heat loss in winter and limit heat transfer through the building fabric in summer. This contributes to improved indoor comfort and lower heating and cooling demands.
Ash & Lacy’s U-value calculator enables users to determine the insulation thickness and AxiAL+ bracket length required to achieve their target thermal performance. By accounting for thermal bridging through brackets and rails, the calculator provides accurate U-value calculations to support compliant, energy-efficient façade design.
How does the tool work?
The calculator determines the thermal performance (U-value) of your roofing or cladding build-up. Calculations are carried out in accordance with BS EN ISO 6946 and SCI-P312 Metal Cladding U-Value Calculation guidance for the majority of configurations. For standard build-ups featuring 1.0 m bracket centres, 1.5 m or 1.8 m rail centres, 0.040 W/mK insulation, and Ash & Lacy 32/1000 or 19/1000 cladding profiles, results are derived from a validated database of 3D finite element thermal models developed using ANSYS Steady-State Heat Transfer, providing an enhanced level of accuracy.
To determine your U-value, simply follow these steps:
- Select your application. Choose from AshGrid™, DuoTherm 100, DuoTherm 200, or DuoTherm 300.
- Select the bracket and rail centres. Choose the bracket spacing and rail centres to suit your structural design.
- Choose your sheeting profile. Available for an AshGrid™ -only configurations.
- Select your bracket length. Match your cavity depth or explore how different bracket lengths influence the overall U-value.
- Choose your insulation. Select the insulation conductivity for an AshGrid™ -only systems or choose Knauf FactoryClad Roll or ROCKWOOL Cladding Roll for DuoTherm systems.
Once your build-up is complete, create an account to export a project-specific PDF report containing your U-value calculation and configuration details.
Frequently Asked Questions
What is a U-value?
A U-value is a measure of thermal transmittance, indicating the rate at which heat passes through a material or building component. It is expressed in units of W/m²K, with lower U-values representing better thermal insulation.
Is a low u-value better?
Generally, yes. A low U-value improves thermal insulation, reducing heat loss in winter and limiting heat transfer through the building fabric in summer. This lowers heating demand and, where air conditioning is used, can reduce cooling energy by keeping conditioned air inside. However, low U-values alone do not prevent overheating, which is usually caused by solar gains through glazing. To achieve good year-round comfort, low U-values should be combined with effective solar shading, appropriate glazing and good ventilation.
What are the UK wall U-value requirements?
Wall U-value requirements depend on the location, building type and nature of the work. In England, new external walls and walls built as part of a domestic extension generally aim for a U-value of around 0.18 W/m²K under Approved Document L. Existing walls undergoing thermal renovation are typically expected to achieve approximately 0.30 W/m²K, where technically and economically feasible.
What is the Passivhaus U-value requirement for walls?
Passivhaus walls commonly achieve U-values of approximately 0.10 to 0.15 W/m²K. However, Passivhaus certification is based on the overall energy performance of the building rather than one fixed wall U-value. Airtightness, thermal bridging, ventilation, windows and total heating demand must also meet the required standard.
What is the difference between an R-Value and a U-Value?
R-value is a measure of thermal resistance, whereas U-value measures thermal transmittance. As reciprocal values, they both describe thermal performance from different perspectives: a higher R-value corresponds to a lower U-value.
What is the point of thermal transmittance (Chi-values (χ)) for the AshGridTM brackets?
There is no single universally applicable Chi-value for an AshGridTM bracket. The value depends on the overall bracket configuration and the built-up construction in which it is installed, including the insulation type and thickness, fixing arrangement, rail position and bracket geometry. A project-specific thermal calculation is therefore required to determine the appropriate Chi-value and its effect on the overall wall U-value.
I can't configure my build-up using the online tool. How can I determine my U-value?
If your proposed construction cannot be accurately represented, please submit a Roofing Project Service Registration using our online checklist for a project specific U-value calculation.
