Ashzip Full Height Halter Bracket

Developed exclusively for use with the Ashzip standing seam roofing system, the use of this thermally efficient full height halter bracket is designed to offer an easy to install solution where low U-values are required. The halter bracket is manufactured in heights of 245mm, 295mm and 345mm to offer U-values of 0.25, 0.20 and 0.16 W/m²K respectively. This method of construction significantly reduces installation time as a single component is fixed straight through to the purlin when used in conjunction with a standard liner profile.

The Ash & Lacy full height halter system is simple to use as the halters are set out using a template which simply slots over the base of each halter bracket to ensure it is correctly positioned. The use of the template also saves time as accuracy of setting out is ensured.

Benefits

• Single component – faster installation (compared to halter bracket used in conjunction with a secondary support system)



• Allows halter brackets to be set out to module of the sheet – 300 or 400 coverwidth



• Easy to install with liner profile module



• Setting out template ensures accuracy



• Thermally efficient – achieves U-value of 0.16 W/m²K

• Reduces effects of repeated thermal bridging



• Allows free-movement of standing seam top sheet



• Continuous insulation layer easily achieved



• Creates structurally sound roof construction



• Directional marking for ease of installation



• Cost-effective